Side type hot air curtain

The principle of

RM side type hot air curtain is to use hot water or steam as heat medium, powered by centrifugal ventilator and axial flow ventilator, through static pressure box, again through the heater to heat the air, the hot air outlet hot air curtain to form.

Axial flow ventilator side blowing hot air curtain features:

1, straight league fan and impeller, without bearing support;

2, save electricity, can use the existing hot water or steam as heat medium, in the heat source cost has greatly reduce the electricity; In the use of fan, axial flow fan and can save 70% of electricity to centrifugal fan;

3, low noise, axial flow ventilator was lower than those of centrifugal fan noise 10 dB.

Centrifugal fan side blowing hot air curtain features:

1. Export uniform wind speed;

The installation height is low; 2.

3. Small volume, simple installation, easy maintenance.

Model specification

Example: the RM - 6039 - z - C - 16

Send air volume of 16000 m3 / h, for steam, heat medium export airflow nominal width 3900 mm, nominal diameter of 600 mm side axial-flow impeller hot air curtain.